Fire Suppression Systems Protect Assets, Save Lives
“There’s minimal damage, because we’re taking away the heat that would damage the engine,” he points out. As a result, determining the ignition point and cause of the fire is easier.
In addition, fans in the engine compartment are placed to direct the water spray, especially because of the air flow through the area. After being discharged, the system can be recharged by mechanics in the bus garage, rather than a local fire extinguisher shop, meaning a minimal refill cost.
Fogmaker provides the recharging apparatus and technician training on the system. “They would recharge it in the vehicle – they would have to blow out the lines, but that’s it,” Dowling says.
The system’s fire detection components don’t require any power, and the fire suppression system can function in any orientation, Dowling says. “If the bus was on its side or upside down, our system would still work,” he says.
Because Fogmaker uses water, there is no hazardous material disposal required after the system is discharged.
“It’s a patented technology we brought over from Europe,” Dowling says. The systems are used in mining and military applications, with growing use seen in the renewable energy sector in wind farms, where the hydraulic-controlled turbines require fire protection.
Jomarr Products Inc.
Jomarr Products Inc. is primarily an OEM supplier of vehicle fire suppression systems, Perrella says, with systems custom designed for the specific vehicle application. Jomarr fire systems are not “off the shelf” or “one size fits all,” Perrella points out. “Typically, we require a description of the vehicle along with a dimensional drawing of the vehicle hazard areas to be protected before we design a fire suppression system,” he explains. “We do not manufacture portable extinguishers or kitchen systems, etc. We specialize in and manufacture only vehicle fire suppression systems.”
The company’s systems feature clean agent fire suppressants that dissipate after discharge, eliminating clean-up. Clean agents do not harm the engine, wiring or sensitive electronic equipment, and required regular maintenance is minimal, Perrella says.
In addition to Jomarr’s OEM systems, the company also offers an inexpensive, disposable aftermarket product called the FireStick. Developed initially for military equipment and vehicle applications, the FireStick uses a combination clean agent and sodium bicarbonate fire suppressant and is easily installed, Perrella says.
The FireStick, which is compact and self-contained, discharges automatically from a self-activating, temperature-sensitive delivery tube and requires no mechanical or electrical power. The FireStick is ideal for areas such as vehicle battery boxes, electrical cabinets, cargo areas and generator areas. It is available in various sizes, from 8 inches in length, which provides 15 cubic feet of coverage, to 32 inches in length, providing 130 cubic feet of coverage.
Kidde Technologies Inc.
Kidde Technologies Inc. prides itself on providing support to customers. “Kidde’s been in business for about 100 years, so our background in fire protection is very in-depth,” Kidde’s Peoples says. “We work closely with the customers to determine what their needs are and what’s the best way to attack the type of fires that they’ve had, whether electrical or fuel related.”
< p>Peoples says causes of fires on school buses tend to be related to the cables going from the battery to the alternator and starter. “If you don’t have your detection systems either attached to those cables or in close proximity, then your detection time can be delayed considerably.”
Installing the system correctly from day one is important, Peoples says, to reduce the amount of maintenance required over the life of the system. “We try to eliminate as much maintenance as we can, but some of it is driven by regulations, like from the DOT [U.S. Department of Transportation],” he says. “We don’t have a lot of components. The simpler it is, the better it works and the easier it is to maintain. After you have a fire and determine what the cause was, depending on the amount of damage the fire may have caused to any of the components, you would just put in a new extinguisher.”
The company offers free onsite training for the life of the vehicle equipped with its products. In addition, Kidde sends an engineer to certify the installation of its fire suppression systems on a group of vehicles. “That gives the customer something to fall back on, that a factory representative has gone in and said, ‘Yes, it was installed correctly to do the job as it was intended.’”
The Kidde automatic fire system is compatible with diesel, CNG, LNG, LPG, hybrid-electric, hydrogen, methanol and gasoline-powered vehicles. The system can be used on vehicles with 12- or 24-volt electrical systems and is highly resistant to shock, vibration and environmental extremes.
The system features supervised circuitry, adjustable engine shutdown and extinguisher discharge time delays, manual discharge and driver-enabled override. Major components include control panels, high-speed infrared, linear thermal and spot thermal fire detection, and dry chemical extinguishers. In addition, Kidde manufactures a combustible gas sensor that can be added to the system to continuously monitor for gas leaks.
Read More Articles Like This… With A FREE Subscription
Campus Safety magazine is another great resource for public safety, security and emergency management professionals. It covers all aspects of campus safety, including access control, video surveillance, mass notification and security staff practices. Whether you work in K-12, higher ed, a hospital or corporation, Campus Safety magazine is here to help you do your job better!