As transportation professionals, what would you say is the single most important thing we do? Make sure our buses run on time? Keep our buses maintained? Manage our budgets? Certainly these things are critical, but our job really amounts to one primary responsibility:  keeping kids safe. And one
of the most critical ingredients in keeping kids safe is our ability to properly handle a school bus accident.

All of our plans to keep kids safe are put to the test when a school bus accident occurs. In the blink of an eye, we have the possibility of emergency responders, injured students, urgent communications with parents, and a host of other complicated, chaotic and stressful issues that need an immediate and appropriate response from us.

The best way we can prepare for a school bus accident is to use the same type of planning that we would use for any other type of emergency event that could occur in our schools, such as weather-related closings,  bomb threats or fire drills. Emergency planners know that breaking these situations down into the four phases of the emergency response cycle – prevent, prepare, respond and recover – offers the best way for us to successfully fulfill our responsibilities.

Like so many aspects of our work, when you handle these situations perfectly, no one notices. But when you do it wrong, it can attract media attention. Using the emergency response cycle to plan for school bus accidents is a way to add structure and order to managing this potentially stressful event. Consider each phase of this cycle as equally critical and we will find our response phase activities much more manageable once the inevitable call comes in that an accident has occurred.

Phase 1: Prevention
The goal of prevention is to decrease the need to respond to an accident in the first place. Typical activities that we would do to prevent accidents include identifying known local hazards, conducting and reviewing safety audits, encouraging staff to provide input about safety issues and reviewing past accident data to determine our vulnerability to certain types of accidents.

Critical questions we should be asking include:

• Are we sending the buses on the safest routes possible?
• Have we used the new National Highway Traffic Safety Administration guidelines to make sure our bus stops are located correctly?
• Have we conducted a recent safety assessment of each of our school loading zones?
• Have we ensured that our drivers and monitors are receiving high-quality safety training?
• Are our student riders trained on how to safely board, ride and exit the bus, and what to do in an emergency?

The New York State Department of Education publishes a document every year (do a web search for “School Bus Safety Is One Bus Stop At A Time”) that is an excellent example of analyzing data to help us prevent school bus accidents. Through this document, New York State bus drivers and monitors are advised of important trends that help them to better protect their student riders. For example, in New York, we know that it is our youngest riders – students 4 to 8 years old – who are at the greatest risk on a school bus.

We routinely analyzed our bus accident data at Buffalo (N.Y.) Public Schools, which enabled us to know that 71 percent of our accidents occurred at intersections. This type of knowledge helped us shape our training curriculum so that drivers knew where the areas of greatest concern were.

Phase 2: Preparedness
Being prepared will enable a rapid, coordinated and effective response when a crisis occurs. What are some of the things we do in this phase? We identify all of our partners who might be involved with us in a bus accident response.  Coordinating with partners ahead of time is the best way to make sure that we are ready to work together during a real emergency.

We should develop procedures for communicating with staff, parents and the media. We need to know who is on the bus, and we need to be able to account for all students during an accident. We should prepare the equipment needed for an accident response – things like vehicles,  cameras, clipboards and phones.

We often have weather issues here in Buffalo, and because of these issues we learned that pencils work much better than pens in wet or snowy weather, so we were always prepared with a supply of sharpened No.  2s.

Phase 3: Response
The response phase is sometimes thought of as the entirety of a school bus accident, but as we are discussing, this is a mistake.

Typical activities of the response phase include putting notification procedures in place so that we are aware of an accident as quickly as possible. We need to be able to identify and understand the type of accident that occurred so that we can determine the appropriate response. We need to maintain communication among all parties during the duration of the response. We need to monitor how any emergency first aid is being administered and the disposition of all students involved in the accident. A crisis is the time to follow the crisis plan and make use of our preparations; it is not the time to figure it all out.

Related Content